We are one of Concrete Gypsum Statue Mold Making Raw Silicone Rubber Manufacturers.
This mold silicone is a two component vulcanized silica gel. It can be vulcanized at room temperature. A crosslinking reaction is produced under the action of a curing agent to form a flexible, elastic colloid. You can adjust the speed of the glue reaction by adjusting the catalyst ratio.
This Concrete Gypsum Statue Mold Making Raw Silicone Rubber is easy to infuse, and it has low viscosity and good fluidity. The mold made from it does not deform and the hardness is also very suitable for the product.
Place of Origin: Guangdong, China (Mainland)
Brand Name: Rongxingda
Model Number: RTV1530
Mixing Ratio: 1:1
Hardness shore A: 30±2
Tear Strength(Pli): ≥32.4
Tensile Strenght(Psi): ≥5.5
Pot life time(mins): 30-40
Demolding time(hrs): 6-8
1. This liquid silica gel has good fluidity and can be made into any mold.
2. It is easy to operate, just mix it in proportion and mix it evenly.
3. This silica gel has high flexibility, tear resistance, and resilience.
4. It is easy to demould. After the mold is used, no raw materials will stick to the silicone mold.
It can be used in the manufacture of various plaster sculpture molds. It can be used for toys, gifts, fine patterns, glass crafts, lighting, candles, character reproduction molds, reliefs, Buddha statues, craft gifts and other mold making.
Physical properties of Condensation Cure Mold Making RTV2 Silicone Rubber
Item NO.:RTV1530Mix ratio:1:1Elongation:
Color:TranslucentTensile strength:＞5.5MPaPot life time:
Hardness:30±2 AShrinkage:≤0.1 %Cured time:
7000±2000Warranty:12 monthplatinum cure silicone rubber